| |
|
|
A Variety of Fastening Options
From plates to screws and discs, Sika Sarnafil offers a large variety of fastening methods for attachment to steel, wood, insulation, hardboard, or concrete.
See our Product Data Sheets for more information.
|
 |
Sarnadisc MaxLoad is a 3.5 inch round plate made from 20 gauge AZ-50 Galvalume coated steel, and meets the Factor Mutual 4470 criteria for corrosion resistance. It is used with the Sarnafastener MAXLoad fastener on our Sarnafast system. This system makes Sika Sarnafil the first PVC membrane manufacturer to offer an FM 1-90 rated, 12-inches-on-center single weld mechanically attached system for 10-foot wide membranes. |
|
|
|
Sarnadisc XPN is high-strength linear plate used with a Sarnafastener to attach the S327 membrane to the roof deck within the Sarnafast (seam attached) system. It has a unique rib design to increase strength and to provide protection to the S327 membrane underside from abrasion by the fastener head. It's flat profile on the bottom also allows it to be used over hard board substrates. |
|
|
|
Tapcon Screw is a threaded fastener with a rubber gasket used with Sarnareglet to terminate Sika Sarnafil flashings into masonry substrates such as concrete or concrete block. |
|
|
|
Sarnadisc - 2 3/8 is a round, large diameter high strength plate used with the Sarnafastener XP to attach the 3 meter wide roof membrane to 22-24 gauge steel and 1/2 - 5/8 inch wood roof decks within the seam attached system. |
|
|
|
|
© 2006 Sika Sarnafil Inc. | 100
Dan Road | Canton, MA 02021 | 800-451-2504 |
webmaster.sarnafil@us.sika.com
Legal
Disclaimer
|
|
