| |
|
|
Peel & Stick
Sika Sarnafil’s new Peel & Stick membrane provides the building owner with the benefits of an adhered roofing system without the concern of disrupting building operation during installation.
Peel & Stick has no odors or volatile organic compounds to bother building occupants and disrupt building operations. It's perfect for hospitals, schools or any building where odors and VOC emissions are a concern. And, because the adhesive is applied at the factory, you are assured of consistent coverage. Peel & Stick saves time and improves rooftop productivity allowing the roof to be completed and watertight sooner.
Click here to obtain specifications and details for the peel & stick system.
View a video about Peel & Stick
Click on the link below that corresponds best to your connection speed:
Peel & Stick - 56k
Peel & Stick - 100k
Peel & Stick - 300k
 |
 |
After the usual preparation of the roof deck, installation of the 6.5 ft. wide membrane requires just four simple steps:
- Unroll the Peel & Stick membrane;
- Cut to fit, laying it in place, and pulling off the release liner;
- Smooth it out with a broom; and
- Press it down with a roller.
Completing a job in half the time required by a traditional, adhered roof is a typical Peel & Stick benefit.
|
Key:
1: Structural Deck
2: Vapor Retarder
3: Insulation
4: Insulation Fastener
Sika Sarnafil’s Peel & Stick membrane is manufactured using the same time proven formulation that has been protecting roofs for over 40 years. That means you can have confidence that Sika Sarnafil’s Peel & Stick membrane will continue to perform for years to come.
   
As it is an EnergySmart Roof® membrane it's highly reflective surface reduces solar heating of the roof and building envelope, reducing building cooling costs and reducing the urban heat island effect that is a contributor to smog formation.
© 2006 Sika Sarnafil Inc. | 100
Dan Road | Canton, MA 02021 | 800-451-2504 |
webmaster.sarnafil@us.sika.com
Legal
Disclaimer
|
|
